Guides
Palletising solar panels correctly
The best load securing does not help if the pallet itself does not hold. Modules travel safest the way the manufacturer packed them. If they are re-assembled, for example for partial quantities, pallet, edge protection and strapping matter.
What matters
- Manufacturer packaging first
- Cartons, corners and straps from the manufacturer suit the module. Leave unopened where possible.
- Load-bearing pallet
- Broken blocks or missing boards lead to breakage. For heavy modules choose a pallet with enough capacity.
- Edge protection and strapping
- Edge protection on all corners, straps tight but not loading the glass.
- Labelling
- Quantity, weight and “do not stack” clearly visible – this helps loading and receipt.
Planning questions
We clarify these points before quoting – the earlier they are known, the more precise the plan.
- Are the modules in original packaging or re-assembled?
- Which pallet and what weight?
- Does the manufacturer specify an orientation?
- Is the pallet visibly labelled?
What we need from you
- Pallet type and dimensions
- Weight per pallet
- Modules per pallet
- Manufacturer orientation
Preparation: You hand over the goods ready for shipping in the manufacturer's packaging; for storage systems the data sheet with watt-hours and UN number is available. We check per request whether special cases such as a crane or a dangerous goods vehicle are feasible.
What we do for you
What we organise
- Road transport for PV modules, inverters, mounting systems and battery storage across Europe
- Planning by pallet count, weight, loading and unloading point – for warehouses, wholesalers and sites
- For battery storage we clarify UN number, packaging and documents before quoting
Good to know
The module manufacturer's packaging and transport instructions remain decisive; this guide does not replace them.
How it works
- 01
Request
You send route, date, product group and quantity using the form – anything unknown can stay open.
- 02
Review
We ask for pallet type, weight and packaging condition before planning the vehicle.
- 03
Quote
You receive a quote with the agreed scope – unloading, waiting time and dangerous goods questions are stated explicitly.
- 04
Execution
At collection the driver checks pallet and packaging visually and notes anything unusual.
Questions and answers: Palletising modules
May solar panels be stacked on a pallet?
As the manufacturer specifies. We avoid placing other goods on module pallets.
What if the original packaging is missing?
Then repack with edge protection, interlayers and a load-bearing pallet – and tell us in advance.
Must a module pallet be labelled?
It is not mandatory but helps: quantity, weight and “do not stack” prevent mistakes when loading.
Request
Request for this topic: Palletising modules
Three steps. Anything you do not know yet can be left open.
Details for planning
- Pallet type and dimensions
- Weight per pallet
- Modules per pallet
- Manufacturer orientation