Solar-Spedition

Goods

Transporting glass-glass and bifacial modules

Glass-glass modules have glass on both sides, bifacial modules also use light from the rear. Both mean more weight per pallet and edges that do not like impacts. We plan vehicle, securing and unloading according to your module's data.

What matters

More weight
Two glass panes weigh more than glass and backsheet. The pallet weight in data sheet or packing list determines vehicle and tail lift.
Protect the rear
With bifacial modules the rear side is active too. We avoid pressure marks from straps or goods placed on top.
Frameless or thin frames
Without a wide frame the edges are the weak point. Edge protection and strapping remain untouched.
Manufacturer instructions
Flat or upright, stacking limit, environment: we follow what the manufacturer specifies for transport.

Planning questions

We clarify these points before quoting – the earlier they are known, the more precise the plan.

  1. Which module type and what pallet weight?
  2. Does the manufacturer specify a transport orientation?
  3. How many pallets and to which unloading point?
  4. Who unloads with which equipment?

What we need from you

  • Data sheet or packing list
  • Number of pallets and weight
  • Loading and unloading point
  • Date

Preparation: You hand over the goods ready for shipping in the manufacturer's packaging; for storage systems the data sheet with watt-hours and UN number is available. We check per request whether special cases such as a crane or a dangerous goods vehicle are feasible.

What we do for you

What we organise

  • Road transport for PV modules, inverters, mounting systems and battery storage across Europe
  • Planning by pallet count, weight, loading and unloading point – for warehouses, wholesalers and sites
  • For battery storage we clarify UN number, packaging and documents before quoting

Good to know

Micro-cracks are not visible from outside. If an impact is suspected, only an inspection by the manufacturer or an expert helps.

How it works

  1. 01

    Request

    You send route, date, product group and quantity using the form – anything unknown can stay open.

  2. 02

    Review

    We check weight and the manufacturer's transport instructions and choose vehicle and securing accordingly.

  3. 03

    Quote

    You receive a quote with the agreed scope – unloading, waiting time and dangerous goods questions are stated explicitly.

  4. 04

    Execution

    Loading without pressure on edges and rear, secured transport, delivery with visual check.

Questions and answers: Glass-glass and bifacial modules

Are glass-glass modules more sensitive in transport?

They are heavier and the edges carry a lot. In manufacturer packaging and properly secured they travel like other modules.

May bifacial modules be stacked?

Only as the manufacturer specifies. We do not place other goods on module pallets.

How do I recognise transport damage?

Note visible damage to packaging, corners or glass on the consignment note immediately. Invisible micro-cracks can only be found by inspection.

Request

Request for this topic: Glass-glass and bifacial modules

Three steps. Anything you do not know yet can be left open.

Details for planning

  • Data sheet or packing list
  • Number of pallets and weight
  • Loading and unloading point
  • Date

Prefer to talk directly?

+49 30 346 467 850info@logisticoo.comMon–Fri 8am–6pm Berlin time (CET/CEST)

Route and date

Collection
Destination

We check every route and come back with a proposal.

Date
Where is it delivered? (optional)

What is being transported?

Quantity
Total weight
Does the shipment contain lithium batteries?

For lithium batteries we clarify the UN number and documents after your request.

You can send data sheets or packing lists after our first reply – no upload is needed here.

Contact and review

Anything that matters for planning.

Your details at a glance

Please review your details. “Edit” takes you back to the step; nothing is lost.