Goods
Transporting home batteries
A home battery – also called a home storage system – usually consists of several battery modules and a control or inverter unit. Each module is typically well above 100 watt-hours – which makes the shipment class 9 dangerous goods. We clarify with the data sheet how it is packed, marked and documented.
What to check before shipping is summarised in the battery shipping checklist.
What matters
- UN 3480 or UN 3481
- Loose battery modules travel as UN 3480, modules in a unit or packed with it as UN 3481. The data sheet usually states the right number.
- Pallet in manufacturer packaging
- Modules of 12 kg or more with an impact-resistant casing may also travel on pallets under P903 – secured against shifting and with no load on the terminals.
- Label 9A
- Each package bears the UN number and label 9A; the transport document is added.
- Battery mass per transport unit
- A few home batteries often stay below 333 kg battery mass – then orange plates are not required. Larger quantities need a vehicle with dangerous goods equipment.
Planning questions
We clarify these points before quoting – the earlier they are known, the more precise the plan.
- How many systems and modules, with what Wh per module?
- Which UN number is in the data sheet?
- How heavy are the batteries without packaging?
- Are the systems new and in original packaging?
What we need from you
- Data sheet with Wh and UN number
- Quantity and battery weight
- Packaging
- Collection and delivery point
Preparation: You hand over the goods ready for shipping in the manufacturer's packaging; for storage systems the data sheet with watt-hours and UN number is available. We check per request whether special cases such as a crane or a dangerous goods vehicle are feasible.
What we do for you
What we organise
- Road transport for PV modules, inverters, mounting systems and battery storage across Europe
- Planning by pallet count, weight, loading and unloading point – for warehouses, wholesalers and sites
- For battery storage we clarify UN number, packaging and documents before quoting
Good to know
Used or returned systems only with a clear statement of condition – damaged batteries fall under special provision 376.
How it works
- 01
Request
You send route, date, product group and quantity using the form – anything unknown can stay open.
- 02
Review
We compare data sheet, packaging and battery mass and clarify the ADR duties for vehicle and document.
- 03
Quote
You receive a quote with the agreed scope – unloading, waiting time and dangerous goods questions are stated explicitly.
- 04
Execution
Acceptance of the marked pallets with transport document, secured transport, delivery to installer or warehouse.
Questions and answers: Home batteries
Is a home battery dangerous goods?
Yes, if it contains lithium-ion batteries above 100 Wh – which is practically always the case for home batteries. It travels as UN 3480 or UN 3481.
May a home battery be transported on a pallet?
Yes. Under P903, batteries of 12 kg or more with an impact-resistant casing may travel on pallets, secured and with protected terminals.
Must the battery be discharged before transport?
ADR sets no state of charge for road transport. If the manufacturer specifies a transport state of charge, it should be followed.
How is a home battery delivered to the installer?
Usually on a pallet in manufacturer packaging and marked as dangerous goods. At destination the handover is by forklift or by tail lift and pallet truck, as agreed – we clarify this before the appointment.
Request
Request for this topic: Home batteries
Three steps. Anything you do not know yet can be left open.
Details for planning
- Data sheet with Wh and UN number
- Quantity and battery weight
- Packaging
- Collection and delivery point